DBacoustic MX600 Wireless Microphone

Microphone DBacoustic MX600

DBacoustic MX600 wireless microphone provides professional audio solutions for those looking for the perfect combination of quality and reliability. Not only does it ensure clear, stable sound, but Microphone DBacoustic MX600 It is also easily integrated into any modern sound system, suitable for the strict requirements of users.

General Introduction to DBacoustic MX600 Wireless Microphone

Smartly designed with stable performance, wide reception frequency and extremely low distortion, this product will be the optimal choice for those who desire the perfect combination of quality and reliability in sound systems.

Outstanding product specifications:

• Operating frequency: The microphone has a wide operating frequency, helping to avoid interference and ensuring a stable signal.
• Number of adjustable channels:  Allows adjustment of up to 100 channels for each group, allowing users to flexibly choose the appropriate channel and avoid signal conflicts.
• Oscillation mode: PLL oscillation method helps maintain stable frequency, minimizing unwanted noise and fluctuations.
• Frequency stability: Stable frequency with error of only about ±10PPM, ensuring the signal is always accurate and not distorted.
• Identification mode: This mode helps to identify and adjust non-standard frequencies, improving the microphone's ability to operate in environments with many signals.
• Pilot line: Using digital pilot technology to control and monitor frequency, helps increase system stability.
• Received sensitivity: High sensitivity -95–95DBM helps the microphone receive signals from long distances while maintaining stable sound quality.
• Recording frequency: Wide frequency range, from 40Hz to 18kHz, helps the microphone capture clear and detailed sound at all levels.
• Harmonic distortion: Low harmonic distortion, only less than 0.5%, ensures undistorted sound quality, maintaining fidelity.
• Signal to noise ratio: High signal-to-noise ratio of 110db or higher helps the microphone operate stably even in noisy environments, delivering clean sound.
• Audio output port: Provides flexible audio ports, XLR for discrete signals and 6mm jack for two-channel mixed audio.
• Transmission capacity: Low transmission power 3-30mw saves energy but is still strong enough to maintain a stable signal.
• Modulation mode: FM modulation mode helps transmit audio signals without causing interference, ensuring sound quality.
• Battery specifications used: Uses 2 standard 1.5V AA batteries, convenient and easy to replace, helping the microphone operate stably.
• Power adapter specifications: Flexible power adapter, supports wide voltage from 100V to 240V, allows for global use.
• Wattage: Microphone power 10W or more, strong enough to provide clear, undistorted audio signal.

Detailed Review of Features and Outstanding Features of DBAcoustic MX600 Microphone

With its superior features and characteristics, this product not only delivers superior sound quality but also meets the needs of use in environments that are strict on frequency and signals.

Compact, Complete Design

DBacoustic MX600 wireless microphone has a durable design with a high-quality alloy shell, providing a luxurious appearance and good protection for the internal components. With light weight, users can easily use it for a long time without feeling tired. The control buttons are arranged reasonably, with an LED screen clearly displaying parameters such as frequency and battery level, making adjustment easier.

The microphone uses 2 standard 1.5V AA batteries, supporting long-term use and easy replacement. XLR ports and 6mm jacks allow flexible connection to professional sound systems. PLL technology and digital signals help the microphone resist interference well, maintaining stable sound quality in all environments.

With convenient design and outstanding features, DBacoustic MX600 microphone is the ideal choice for events, seminars and karaoke.

High Frequency Operation

Microphone DBacoustic MX600 operates in the frequency range of 530.000 MHz to 580.000 MHz, allowing users to select a broadcast channel that is compatible with other devices in the environment. This frequency range not only optimizes the signal but also minimizes the possibility of interference from other broadcasting devices.

The wide operating frequency also allows this microphone to be flexibly applied in different environments, from outdoor stages to karaoke rooms or seminars. Having multiple broadcasting channels ensures that users can adjust to suit the space and requirements of each event, thereby bringing stability and efficiency during the broadcasting process.

PLL Oscillation Mode 

One of the strengths of DBacoustic MX600 microphone is the use of PLL (Phase-Locked Loop) oscillation technology, which helps stabilize the broadcast frequency. With this technology, the microphone will always maintain a stable broadcast frequency without frequency deviation or signal loss. PLL technology also helps minimize the impact of interference factors from other electronic devices in the operating environment.

This is an extremely important feature in live performances, large events or conferences that require high precision in audio signals.

Sensitivity From -95 Up To -96 dBM

Microphone DBacoustic MX600 has an extremely high reception sensitivity, from -95 dBM to -95 dBM, helping to capture sound clearly and in detail, even when the speaker or singer stands far from the microphone. This sensitivity helps the microphone to receive good signals in all situations, whether in a large space or when there is a lot of surrounding noise.

Especially when used in events or performances, high sensitivity helps capture the sound of every detail in voice or music, thereby bringing the best and clearest sound quality to listeners.

High Signal-to-Noise Ratio 110 dB Or Higher

Microphone DBacoustic MX600 has a signal-to-noise ratio of up to 110 dB or higher, ensuring that the received signal quality is always clear and not affected by ambient noise. The high noise ratio helps the microphone maintain smooth sound, without interruption or interference, providing excellent sound quality in all environmental conditions.

This is especially important in large events or conferences where there may be many other broadcasting devices operating at the same time. A high noise ratio ensures that the received signal is always stable and accurate.

Flexible, Popular Applications of DBacoustic MX600 Wireless Microphone

DBacoustic MX600 wireless microphone Used in events, seminars, karaoke, stages, recording studios, and mobile sound systems, thanks to its stable reception, anti-interference and flexible channel adjustment capabilities, providing clear, high-quality sound.

• Events and seminars: The DBacoustic MX600 wireless microphone is suitable for large events and conferences where clear and stable sound is required, especially when many people use the microphone at the same time.
• 　: With flexible frequency adjustment, DBacoustic MX600 is a great choice for karaoke sessions, providing a lively and noise-free sound experience.
• Stage and performance: The DBacoustic MX600 microphone provides stable reception on stage, helping artists and speakers to convey sound accurately and clearly.
• Recording studio: Equipped with a wide recording frequency from 40Hz to 18kHz, this microphone is suitable for professional recording studios, delivering detailed and realistic sound.
• Mobile sound system:With its compact design and AA battery operation, the DBacoustic MX600 is ideal for portable audio systems, making it easy to carry and use anywhere.

Where to Buy Cheap, Genuine, High-Quality DBacoustic MX600 Microphone Set?

If you are looking for DBacoustic MX600 wireless microphone genuine with reasonable price, Phuc Truong Audio is a reliable address for you to choose. With many years of experience in the audio field, Phuc Truong Audio Committed to providing genuine, high quality products along with professional consulting services and reliable warranties.

When buying DBacoustic MX600 wireless microphone in Phuc Truong Audio, you are not only guaranteed to own quality audio equipment but also receive many special offers and dedicated after-sales service. Here, our experienced staff will assist you in choosing the right product for your needs and budget, helping you have the best audio experience.

Frequently Asked Questions When Buying DBacoustic MX600 Microphone

Is the DBacoustic MX600 Wireless Microphone anti-interference?

With signal-to-noise ratio up to 110dB or higher, Microphone DBacoustic MX600 Helps minimize noise, providing clear and stable sound.

What amplifiers can the DBacoustic MX600 connect to?

Microphone DBacoustic MX600 Can be connected to amplifiers using XLR or 6mm jack ports, making it compatible with many types of sound systems.

Is the DBacoustic MX600 Microphone set waterproof?

Microphone DBacoustic MX600 not designed to be waterproof. Therefore, users should avoid contact with water to protect the internal components of the microphone.