E3 DKF-210 Array Speaker

E3 DKF-210 Event Speaker

E3 DKF-210 Array Speaker is a top product in the array speaker line that possesses many outstanding technical features such as wide frequency response, high sensitivity, large capacity and the ability to disperse sound evenly, helping to create a great sound experience for users.

General Introduction About E3 DKF-210 Stage Speaker Set

With its special design and advanced technology, this speaker not only meets the requirements of power and sound dispersion but also ensures the ability to reproduce vivid and clear sound.

Outstanding product specifications:

• Frequency response: The speaker has a wide frequency range of 50Hz to 20KHz, allowing for the reproduction of both deep bass and detailed treble, delivering full and clear sound for a wide range of music genres.
• Sensitivity (1W@1m): 103dB (passive mode) HF 113dB LF 103dB (Bi-amp mode), high sensitivity helps the speaker produce strong, clear sound at low power levels, especially when using Bi-amp mode, improving performance for both high (HF) and low (LF) frequencies.
• Nominal impedance: 8Ω, the speaker is easily compatible with most audio amplifiers and provides stable connection.
• Rated capacity: The speaker has high power with the ability to handle 750W AES for LF and 100W AES for HF, supporting peak power up to 3000W for LF and 400W for HF, allowing for powerful and stable sound output.
• LF Driver: Two 10″ woofers with 2.5″ voice coils, allowing for powerful and deep bass reproduction.
• HF Driver:  Two 1″ tweeters and 1.75″ voice coils enable crisp, smooth high-pitched reproduction.
• Dispersion: The 120°×15° sound dispersion angle helps the speaker cover a large space, providing even and clear sound to any location in the room or outdoors.
• Maximum SPL: 131dB continuous, 137dB peak, high SPL helps the speaker maintain clarity and power in loud sound environments, with peak levels up to 137dB, helping to meet loud sound requirements without distortion.
• Connector: Speakon NL4 provides easy and secure connection to professional audio equipment, ensuring stable audio signal.
• Dimensions (Width x Depth x Height): 845×470×315mm makes the speaker easy to move and install in many different spaces, from halls to outdoor stages.

Detailed Review of Features and Functions of E3 DKF-210 Array Speaker

E3 DKF-210 Array Speaker stands out in the world of professional audio thanks to its outstanding features, delivering powerful and clear audio performance for large-scale events.

Exquisite, Modern Design

E3 DKF-210 Array Speaker Designed with optimization for large, professional sound applications such as outdoor events, auditoriums, and conferences. With dimensions of 845mm x 470mm x 315mm, this speaker is not too large but has the ability to reproduce powerful sound.

The speaker housing is made of sturdy material, resistant to harsh environmental factors, protecting internal components from wear and damage caused by external environmental factors.

A highlight in the speaker's design is the LF (Low Frequency) driver system with 2×10 inches (250mm) and HF (High Frequency) driver with 2×1 inches (25mm).

This structure not only enables the speaker to produce powerful sound but also ensures accurate reproduction across all frequency ranges. These components are also optimized for wide and even sound dispersion, providing the best audio experience for listeners in any position in the space.

High Peak Power, Stable Operation

One of the notable points of E3 DKF-210 Array Speaker is the ability to disperse sound widely thanks to the dispersion angle of 120°×15° (H×V). This helps the sound to be spread evenly over a wide range, ensuring that every position in the space can hear clearly and in detail.

With a maximum SPL capability of up to 137dB, the speaker can produce extremely powerful sound without distortion, even in environments with high sound requirements such as outdoor events or concerts.

In addition, the speaker has a nominal impedance of 8Ω, which allows the speaker to operate stably with professional amplifiers without experiencing overload or overheating. Along with that, the rated power is up to 750W AES for LF and 100W AES for HF, helping the speaker maintain high performance without reducing sound quality.

Superior Sound Quality

One of the most important elements of E3 DKF-210 Array Speaker is the ability to accurately reproduce sound in a wide frequency range from 50Hz to 20KHz, helping the speaker easily handle deep bass, smooth midrange, and clear treble.

In particular, the speaker's sensitivity reaches 103dB in passive mode, while in Bi-amp mode, the high frequency (HF) driver's sensitivity is up to 113dB, helping the speaker operate effectively even in large spaces without using too much input power.

Powerful operating capacity is also a big plus of the product. In Bi-amp mode, the speaker has a rated power of HF 100W AES and LF 750W AES, with a peak power of up to 3000W for LF. Thanks to that, the speaker is capable of producing powerful, sharp sound even when operating at high intensity, meeting the strict needs of concerts, large conferences or outdoor events.

Advanced Driver System

E3 DKF-210 Array Speaker Equipped with 2 10-inch (250mm) LF drivers, each driver uses a 2.5-inch dual voice coil, providing powerful and accurate bass handling. The bass is not only clear but also achieves the necessary depth and thickness, suitable for music genres with strong rhythms.

Meanwhile, a 1-inch HF driver with a 1.75-inch voice coil ensures detailed mids and highs and minimal distortion even at high volumes.

The 120°×15° (H×V) sound dispersion angle is a big advantage, helping the speaker cover the sound evenly in a large space without leaving dead spots. This is very important in spaces such as stages, churches, halls, or outdoor events, where uniform sound coverage plays a decisive role in the quality of the listener's experience.

E3 DKF-210 Event Speaker – Popular Applications 

E3 DKF-210 Array Speaker is an ideal choice for events that require powerful, clear sound and even sound dispersion. Here are some of the outstanding applications of this product:

• Major music events and outdoor concerts: With a peak SPL of up to 137dB, the E3 DKF-210 speaker can provide powerful and clear sound for outdoor performances. The ability to disperse sound widely and evenly allows everyone in a large space to hear high-quality sound.
• Corporate conferences and events:This high-sensitivity and powerful speaker is the ideal choice for conferences, exhibitions, and events that require clear and powerful sound transmission to a large audience.
• Sports program:E3 DKF-210 can easily serve sporting events with loud and clear sound requirements to effectively transmit audio signals in large spaces such as stadiums.
• Stage and theater: With the ability to disperse sound widely and evenly (120°×15°), this speaker is also used in stage and theater programs, helping to reproduce sound faithfully and vividly for audiences far from the stage.
• Weddings and private events: Wedding ceremonies or personal events can also take advantage of the E3 DKF-210 speaker to ensure excellent sound quality in a large space, bringing a classy sound experience to guests.

Where to Buy Cheap, Genuine E3 DKF-210 Stage Speaker Set?

Stage speaker system E3 DKF-210 Genuine and cheap can be found at Phuc Truong Audio – a reputable address in Vietnam specializing in providing professional audio equipment from famous brands.

To ensure you buy the right genuine product with good after-sales policy, you can find more detailed information at the store or visit the official website of Phuc Truong Audio.

Besides, Phuc Truong Audio Regularly have attractive promotions and offers. Please contact the store directly for specific advice on prices, products and accompanying services.

Frequently Asked Questions When Buying Array Speaker E3 DKF-210 

Does the E3 DKF-210 speaker need to use an additional signal processor?

For optimal audio performance, the use of a DSP signal processor is recommended, especially when using the speaker in complex audio systems or environments that require professional audio processing. The signal processor helps control the frequency and optimize the audio output.

Is the E3 DKF-210 Stage Speaker waterproof?

Although E3 DKF-210 Although it is ruggedly designed and suitable for a variety of audio environments, this speaker is not designed to be completely waterproof. Therefore, if used outdoors, you will need to protect the speaker from weather elements such as rain or high humidity to avoid damage.

Is the E3 DKF-210 speaker easily distorted when used at high power?

Speaker E3 DKF-210 Designed to minimize distortion even at high power. With peak power up to 3000W, the speaker still maintains clarity and sound detail, especially when using Bi-amp mode to split the power between the woofer and tweeter.