Stocking
0% installment payment
HOT - TRADE IN OLD FOR NEW - GET A QUOTE NOW
FOR PROJECT CUSTOMERS
TECHNICAL PROCESSING WITHIN 24 HOURS
(0901 550 283)
Direct support, instructions and software installation via Teamview
Studiomaster DQX2-6000 is a high-end power amplifier line from professional audio brand Studiomaster - UK, possessing outstanding performance and the ability to handle extremely heavy loads, suitable for large stage sound systems, multi-purpose halls and line arrays.
Amplifier Studiomaster DQX2-6000 is a professional 2-channel power amplifier with powerful performance, providing RMS power up to 7140W/channel at 2Ω and supporting bridge up to 14.280W, suitable for large stage sound systems, line arrays and high-power subwoofers.
Standard 2U rack design, sturdy metal frame, supports stable operation at low impedance, 12-month genuine warranty. Below are some outstanding advantages of the product:
The Studiomaster DQX2-6000 Amplifier impresses with its extremely superior amplification performance with an RMS power of 7140W per channel at 2Ω impedance - a very rare number in the segment. With the ability to operate stably at low loads, this device allows users to drive high-power subwoofers, 3-way full-range speakers or array speakers without worrying about distortion or loss of power.
High linearity and the ability to maintain signal quality when pushed to high sound pressure levels help the amplifier maintain clean sound, limit THD+N distortion and maintain high dynamics for the entire system. Semantic Triple: (Studiomaster DQX2-6000, delivers, 7140W RMS at 2Ω).
With a 2U rackmount design, the Studiomaster DQX2-6000 measures 4.4 x 48.3 x 46.5 cm and weighs just 12 kg – ideal for both touring and fixed installations. The metal case is powder-coated, scratch-resistant, and durable, while also supporting effective natural heat dissipation.
Inside, the amplifier uses a high-end toroidal transformer power supply circuit, providing stable current during heavy loads. The reasonable layered circuit board structure prevents cross-interference between modules, helping the system operate stably and for a long time. Semantic Triple: (Amplifier chassis, is built from, powder-coated alloy frame).
This amplifier fully supports 3 operating modes: Stereo, Parallel and Bridge, thereby giving sound technicians more flexibility in system configuration. DQX2-6000 can pull 1 21-inch subwoofer in Bridge mono mode or pull 2-4 full-range speakers per channel in Stereo/Parallel.
The XLR balanced input and SpeakON output ports help minimize signal loss, ensuring stable connections with mixers, digital echoes, crossovers or processors. With high power and flexible load capacity, the Studiomaster DQX2-6000 is compatible with almost the entire ecosystem of performance audio equipment. EAV: (Operation mode – Stereo/Parallel/Bridge).
The DQX2-6000 is fully equipped with important protection circuits such as: Short Circuit Protection, Overload Protection, Overheat Protection, and Soft Start. These circuits ensure that the amplifier operates continuously for a long time without causing damage to the speakers or the device itself.
This is a key factor in increasing the life of the system, especially important in sound systems used for performances or halls. In addition, when the internal temperature exceeds the threshold, the system will automatically reduce power or temporarily stop operating to protect components. Semantic Triple: (Studiomaster DQX2-6000, includes, intelligent protection system).
Weighing only 12kg and with high efficiency, the amplifier is not only powerful but also optimized in terms of power consumption - an advantage in systems that need to save operating costs. The internal cooling fan system operates intelligently according to the load to help reduce noise, suitable for environments that require high quietness such as theaters and theaters.
In addition, the device is easy to disassemble and maintain periodically with clear access points, saving time for the technical team. This is the factor that makes Studiomaster DQX2-6000 the preferred choice of professional sound rental units. EAV: (Cooling system – Smart airflow, low-noise fans).
The Studiomaster DQX2-6000 is not only a high-power amplifier, but also an ideal solution for sound systems that require high performance, absolute stability and the ability to handle heavy loads. Here are some outstanding applications:
Yes. With 7140W RMS at 2Ω/channel and stable performance under heavy loads, the DQX2-6000 is fully capable of driving dual 18-inch or 21-inch subwoofers powerfully and stably. This is a very popular choice in auditorium sound system, sounding board big and disco.
Yes. Studiomaster amplifier The DQX2-6000 supports Bridge Mono mode, allowing the power of two channels to be combined to push out a large power line. The power level reaches 14280W at 4Ω, suitable for systems that require extremely strong hitting force, such as pulling a large folded horn sub.
Not recommended. The DQX2-6000 is over-powered and designed specifically for professional stage systems. If used for family karaoke system, the risk of excess power, burning speakers or damaging other equipment is very high. Instead, you should choose smaller amplifiers, suitable for medium-power karaoke speakers.
No. The Studiomaster DQX2-6000 is a pure power amplifier, without built-in anti-feedback or DSP signal processing. If you need to process the input signal, you should combine it with a digital reverb, digital mixer or independent processor.
Are you wondering or have not found the desired product? Please
